The Aquascape Automatic Dosing System requires very little maintenance. When replacing water treatments take a few seconds to inspect and clean the tubing of any debris that is trapped or has formed in the tubing. A soft pipe cleaner available at most hobby stores can be used to clean the tubing.
Attach the water treatment by removing the existing cap included with the water treatment, inserting the proprietary pump tube from the dosing pump into the water treatment and then seal the bag with the included threaded adapter.
Attach the included discharge tubing to the fitting on the side of the dosing system control panel. Simply insert the hose into the fitting until it stops. Ensure that the check valve is in the right orientation with arrow pointing away from the dosing system. The discharge tubing can be installed two ways, either directly into the pond or fountain or by using included output hose holder. The hose holder can be easily attached to plumbing or other round surfaces. Refer to the installation diagrams on the following page for more information.